Відео

Can't I just buy the ignition part that key goes into

Hello mate I love your videos they are very helpful. I have had water ingress on my ecu, same as in this video. It clears up well but one of the capacitors had gone, is this something you could fix? If so how do I get in contact to organise?

Check the lights stalk inside, mine had one of those thin red wires broke and BOTH lights and wipers didnt work.

Hi Luis, where are you based in the uk? Many thanks

Hey great channel! i have A4 with working sensors and i wonder if this cause major problems with 2.0l TFSI engines? I mean people just add liter oil.... it is quite much for this turbo engine? btw mine is at 175 000km quattro model 2011 and last oil change at 165 000 now sensor show about quarter from bottom so little oil consumption?

I understand that we need to buy OPCOM version 1.39 for this to work. Any versions higher will not read the information needed

Faulty battery earth wire was causing the problem

Can anyone help me ive got mercedes benz s class s350 CDI 2010 and when i turn on radio or disk or even voice command dont work it says service unavailable or sound unavailable and the changer dont work either can someone please help ? Ive tried to remove the fuse box and put it back still dint work also tried reset all dint work as well

Hi mate would you be able to tell me how to remove that sensor from the plug. I can't seem to remove mine. AC works well from what I can tell but it won't display the ambient temperature on the driver display.

You must leave it overnight, before releasing it to the client, because in the morning this is when the engine is very slow to start. The problem is not solved

very informative video do you remember what sump plug you used to black of the elbow joint? thank you

Top man again

I am having exactly the same issue, so I will be checking all this out when I get back home

I need your services, how to I contact you ?

Thnx for the detailed guessing in what was used😂 as in jbox..Thnx guys 😂😂😂😢

Hello Liam,hello guys,mine lock doesn’t work when ambient temperature is highter,if I disconnect battery and connect again it work after,can it be relay or switch?! Thanks

Nice job there, but couldn't you have made a copy of the flash from the damaged quadrant to the flash from the new quadrant?

You are like a pro looking after problems, and you always fix it.

Keep it up that amazing work.

Muito bom mesmo. Wooowww.. sim senhora. Let's gooooo

Pareceu-me ouvir falar português lá no fundo do vídeo e depois de saber que o teu nome é Luis de certeza que és de cá grande vídeo a explicar tudo em condições e uma reparação à tuga limpa os contactos que isso fica bom pena esse talento estar no UK és um crânio da eletrónica automóvel gostava de um dia conseguir ser também um abraço da tuga 👊

Quale versione usi e che tipo di Windows hai? A me mi da errore dicendomi che non è una piattaforma clic

boas, o link na descrição já não está ativo com o produto, podes verificar ?

to me on back side it's ok but front it's to high do you know how fix

Weird that the relays are inside the module, and not in the relay box?

I have the same issue but without the warning ⚠️ on the dashboard

Hello sir, do you know the clutch sensor position? Where it is?

The disc comes out without removing the caliper bracket

Hi Mate! How much is final price to fix that problem? Thank you!

I want to Guy this car… its from 2011 tfsi s`line it just has 37700km on it. (23,5k) Miles. For a price of 16950 euro. Should I do it? And is the price ok? Please comment and let me know.

had same problem and chaged out the compressor filter ....good to go

Great stuff as usual, thanks, mate

Hi Luis nice vid like always! I have a project for you. I live far away from your country (UK I guess - 2000km) but I could send the controller for reprogramming by DPD DHL or so.. Here is the issue: Renault Automatic AC controller model year 2017.12. Kangoo but it does not really matter I guess due to Renault Lego style building strategy... So it works without any error code scanned with Xtool, blowing cold air for a while but after a certain time on long ride I see the 0 °C blowing air temp rises slowly to 7-13°C independently from Ambient temperature or set value. I see the command set value remains at minus 10°C and the mixing flap is not opening to mix hot air to the cabin.. I have another controller from same model but from a different earlier built year of 2014. It behaves exactly same way. I thought a lower emission level vehicle's controller programmed differently. So looks like it is a factory programmed "feature" to mess up my fresh cold air :( The temp rise is happening very slowly roughly takes 30 + min to reach + 7- +13°C from the initial 0°C. I can monitor it nicely with Xtool. I guess they are simply modulating the AC clutch with PWM so to speak fuel economy and Emission reduction Euro 6b purpose... Otherwise Fresh AC gas and new ac radiator installed by official service. It was always like this but now it bothers me a lot especial in summer hot 30+°C. Can you adjust/Check the program of AC controller IC? It is really a hard core stuff so I need someone who knows it very well. If I can buy from you a set/kit or something like that then I could play with it on my own of course but if u have ever met such a renault controlling issue u might have a solution already! I thought downgrading the Automatic AC to Manual one but it means I need to replace everything which is a nightmare lot of work. Alternatively Build an own controller with ATmega328P or Arduino... but for this I would need also lots of info about wiring actuators and communication LIN or whatever they are using..... What do you think? or Do you know someone who can help me on this topic? I never had automatic AC in my life but I can promise I will never buy again vehicle with automatic one!!! Manual AC is the best!

Thanks for making this video. I have the same issue in a 2013. Off to get a new key tomorrow.

Could you please share the video of the wiring diagram ? Having same problem

Hi Luis! Another great fix and very informative video. It’s great to see so many parked cars in your neighbourhood so looking forward to watching many more of your car repair videos 😊

Respect

Hello, I have Mercedes x164 and I once in a while I get no sound from the amp once it rains. Guessing this has to do with the rear sam. I have Mercedes star computer.

Hey, I have the same car. I also have a 3ff1 code with another air leak code. Would the same air charge pipe cause these issues? Eg bad MAP sensor or a leak in that pipe

How can I message the guy in this video to do my car

Hello brother, I had exactly the same problem and also the maps were not used at the same time. Do you know what is the reason?

6:42 no electronics on materials like seats blankets,could be fatal :)

Hello master Luis, how are you? I am from Turkey and enjoy watching the videos of Master Turan. Where and how did you learn this job?

Qashkai j10 такая же фигня. Задний левый рычаг пошёл

So what was the problem i watched the video many times although I couldn’t see the answer please i have the same problem exactly

I did everything you have done but mine does not have a problem with the ground. The brown cable does not have continuity. So to test it, I ran a cable straight from ignition, I put it into brown cable slot, to the starter where I tied up tight to the that little plate, I put everything together as normal and I turned the key, it is starting without problems, so in my opinion is the brow cable but I heard others saying that it might be a relay because the brow cable is not straight from ignition to starter. Is that right? What do you think it can be?

You helped me fix mine, but I didn't do it mechanicaly.. there is an option to calibrate it after you clear errors... 5 seconds holding down then release one second the up 1 second.. and it solves it . Anyway thanks

3 month before i had same body modul. Problem was Air condition original was died and donor all works but not air condition. Coding without sucess and on end eeprom change from original to donor all work perfect 😉

Want car back by 3pm.... here you are keys back goodbye 😅

top